Maker online editor
Box Generator
Build a box and matching lid to exact dimensions. Configure walls, bottom, lid clearance, dividers, and decorative patterns, then inspect and export the parts.
InputDimensions and parameters
ExportSTL
Access5.00 RUB / 24 hours
Best suited for
- Organizers and containers
- Component enclosures
- Families of boxes with a consistent lid fit
Editor capabilities
- Exact outer dimensions and wall thickness
- Lid profile and clearance controls
- Optional dividers and surface patterns
- Separate part export
From input to a finished model
-
01
Enter the source data
Upload a supported file or configure the initial parameters.
-
02
Adjust the model
Tune dimensions and editor-specific settings while checking the 3D preview.
-
03
Validate the result
Check dimensions, printability, material, and output settings.
-
04
Export
Download a supported format and complete preparation in your slicer when needed.
Things to consider
- Lid clearance depends on printer calibration and material.
- Print a small fit test before a large job.
- Fine patterns may not reproduce with a large nozzle.
How source data is processed
Geometry is calculated from the entered parameters. Saving and selected service operations may use Maker servers.
Need help with the settings?
The guide covers editor settings and preparing the result for export.
Description updated: 2026-10-17